A team of AI agentsfor all your security operations.
10x your operators. Checking the camera that tripped, following the person, covering every way out, writing it all up: the work your team did by hand is now done by Novin's agents, while the alarm is still live. Your operators get the answer, and make the call.
- LeadAlarm in
Motion on Cam 04, aisle 4, at 23:14. First look.
- A1Sees
One person, torch and backpack, walking the racking slowly.
- LeadWeighs
Site closed since 22:00, nothing booked. Theft fits better than a late shift, but one camera can't settle it.
- LeadPlan
Three ways out of aisle 4. A2 the exit hallway, A3 the fence line, A4 the vehicle gate. All at once.
- A2Evidence
Fire door at the end of the exit hallway is standing open.
- A3Clear
Fence line clear. Nobody on the perimeter.
- A4Evidence
White van at the vehicle gate. Engine running, lights off.
- A1Update
Still in aisle 4. The backpack is full now.
- LeadConnects
Aisle 4, exit hallway, open fire door, yard, gate. One route out, and a van waiting at the end of it.
- CHChallenges
Could be a contractor collecting stock. Is the van expected?
- LeadAnswers
No booking in the site context. A torch, not the lights. The bag was filled from the racking.
- CHConcurs
The evidence holds up. Alert.
- Person in aisle 4 after hours. Novin is checking every way out.
- Fire door open in the exit hallway. Van idling at the vehicle gate, lights off.
- Alert. Guard to the vehicle gate; keep aisle 4 and the exit hallway on screen.
Network Optix
Dahua · DSS
Genetec Security Center
Immix
Any ONVIF cameraIts own VMS. Or inside yours.
Run your sites on Novin's own operator dashboard, where the agents take the screen and show their work. Or keep the VMS your operators know: Novin's investigations land inside it.
- Every camera, every alarm. A live camera wall and one alarm queue, with Novin's suggestion on each alarm, accepted in one tap.
- The agents take the screen. The lead brings up the cameras that matter and the agent log shows every look as it happens.
- Ask, steer, decide. Message the investigation while it runs, ask Novin about any alarm, and get the evidence and open questions, not just a label.
Tell it about your site. Read how it thinks.
Configure the brain in plain language, with no rules to write and nothing to change on site. For every alarm, Novin writes down what it saw, the explanations it weighed, what it did and what it is still checking.
Written by your team, in plain language. Novin reads it with every alarm.
Context, never proof. Change a line and the next alarm is read against it.
Integrate anywhere
Cameras, NVRs and VMS you already own. Its own dashboard, or Milestone, Nx Witness, Genetec, Immix and more.
Do everything
Judge the alarm, run the investigation, put cameras on screen, search the night, map the site and hand over the case.
Site context
Every judgment is read against what is normal for that site, at that hour. Change the context and the next call changes with it.
A first call straight away. Then the team keeps working.
Most systems make you choose: wait for a slow, careful answer, or get a fast guess and a pile of clips to review.
Novin gives you both. The first call lands on the original alarm as soon as the event is judged, so your operator can act. The agents then keep checking the cameras around it and post short progress notes onto that same alarm in Milestone or Nx Witness.
- Less scrubbing through playback. Operators read what the team found instead of searching footage.
- Every alert is challenged. A second agent argues the innocent explanation before anything is raised.
- Guards know where to go. They get the direction of travel, not just a camera name.
- Nothing left hanging. What the team couldn't settle goes to the operator as open questions and next checks.
Armed confrontation: Two hooded figures in a room with a visible firearm on the sofa.
One verdict, everywhere your team already works.
The verdict goes to every destination at the same moment. Follow-up notes go onto the same alarm, so the whole story stays in one place.
Milestone XProtect
An alarm on the camera that fired, with the team's progress written into its comment as the case develops.
Nx Witness · Hanwha WAVE
A Novin event on the original camera, and an investigation layout that puts the cameras that matter on the operator's screen.
Immix
An alarm into the operator queue, linked to a hosted case card that updates as the agents work.
Genetec Security Center
A Novin alarm raised in Security Center with the verdict and the reasoning behind it.
Guards and duty managers
A patrol card that says what happened, where they went and what to do now, sent to the guard on shift.
Email, Slack, Teams, webhooks
The same verdict as an email, a Slack, Teams or Discord message, or JSON for your own systems.
On your cameras in minutes.
One line installs the Novin hub on any box beside your recorders. It finds your ONVIF cameras, RTSP streams, NVRs and VMS on its own, and the next alarm is judged. No new cameras, no rules to write.
- 01
Install the hub
One line on Linux, macOS, Windows or Docker. It only ever talks out over HTTPS, so there are no ports to open.
- 02
It finds your cameras
ONVIF discovery, RTSP streams by URL, and the NVRs and VMS already on the network: Milestone, Nx Witness, Genetec, Hikvision, Dahua.
- 03
The next alarm is judged
Novin starts on the next event. Add site context whenever you like; it reads it with every alarm.
Works with the cameras, recorders and VMS you already run.
Novin sits beside the equipment you own. No new cameras, no rip-and-replace, and nothing new for operators to learn: verdicts arrive where they already work.
Novin Hub on your network
A small service on a box, VM or Docker host beside your recorders. It picks up events, fetches the frames the agents ask for, and writes results back.
- Outbound HTTPS only, no inbound ports
- One-line install, or Docker on any LAN host
- Runs beside the recorder, never on its firmware
Recorders and cameras
Novin listens for events the way each device already raises them, so nothing on the recorder has to change.
- Hikvision, HikCentral and Hik‑ConnectISAPI event stream · HikCentral · Hik‑Connect
- Dahua recordersEvent manager, or alert email
- ONVIF camerasPullPoint and push notifications
- Any NVR that sends alert emails or HTTP notifications
VMS and monitoring
Verdicts and progress notes land inside the software your operators already watch.
- Milestone XProtectAlarms and live notes
- Nx Witness and Hanwha WAVEEvents and an investigation layout
- ImmixAlarms with a hosted case card
- Genetec Security CenterAlarms
Not on the list? If your recorder can send an alert email, point it at smtp.novin.uk and Novin starts judging its alarms.
Your footage stays yours.
Novin needs frames while a case is open, not an archive of your video. What it keeps is the case record: times, cameras, findings and the verdict.
case Harbor Logistics · Unit 2 · 02:32
cameras unit-2 interior, loading door, front car park, rear yard fence
verdict alert · armed confrontation
open one of the two climbing out, or someone new?
frames deleted once the case closes
No video archive in our cloud.
Frames are fetched for an open case and deleted under a retention policy once it closes. We keep the structured case record, not your video.
Learns your site, not your footage.
Agents learn from your site's layout, its normal activity and your operators' feedback, stored as text. Your video is not used to train models.
Outbound only. No open ports.
The hub only makes outbound HTTPS connections (port 443). Your network stays closed to incoming connections from the internet.
What people ask about Novin.
What is Novin?
Novin is AI for physical security: a team of AI agents that investigates every alarm across the cameras a site already has, while the alarm is still live. It writes the case into the VMS or monitoring software your operators already use, so they get the answer and make the call.
How is Novin different from video analytics or AI object detection?
Detection tells you something is in the frame. Novin investigates the alarm: it checks the other cameras, follows the person, covers every way out, compares what it sees with what is normal for your site, and argues the call before it alerts. The result is a case an operator can act on, not a bounding box.
Does Novin cut false alarms?
Every alarm is read against the picture and your site's own context, and a challenger agent tests every alert before it is raised. Operators get the evidence and the reasoning instead of a bare trigger, so routine activity is cleared quickly and their time goes on the real events.
Does Novin replace security operators?
No. Novin does the checking operators used to do by hand, camera by camera, and hands them the case while the alarm is live. The operator makes the call. Novin never closes an alarm on its own.
Which VMS, cameras and recorders does Novin work with?
Milestone XProtect, Nx Witness, Hanwha WAVE, Genetec Security Center and Immix; Hikvision, HikCentral and Hik-Connect; Dahua and DSS; any ONVIF camera, any RTSP stream, and any NVR that sends alert emails or HTTP notifications. Verdicts can also go to email, Slack, Teams and webhooks.
How is Novin set up?
One line installs the Novin Hub on any Linux, macOS or Windows machine, or in Docker, beside your recorders. It finds your cameras, NVRs and VMS on its own and only makes outbound HTTPS connections, so there are no ports to open. No new cameras and no rules to write.
Where does our video go?
Frames are fetched only while a case is open and are deleted once it closes. Novin keeps the case record (times, cameras, findings and the verdict), not your footage, and your video is not used to train models.
How do we try Novin?
Start with one site in shadow mode: Novin runs alongside your operators so you can compare its calls with theirs before it touches a live alarm. Email info@novin.uk to set up a pilot.
Let us show you what Novin can do across every operation you run.
Start with one site. Novin runs in shadow mode alongside your operators first, so you can compare its calls with yours before it touches a live alarm.